Avocent DB-9 FM - RJ-45 Adapter 210129 Manual De Usuario
Los códigos de productos
210129
52 ESP Serial Hub Installer/User Guide
To display general statistics:
1.
From the Top Menu, enter
5
to select Status. The Status Menu will be displayed.
2.
Enter
1
to select General statistics.
Displaying Port Statistics
The Port Statistics display includes the information described in Table 4.3 on page 39 for one or all
ports. All values are cumulative since the ESP serial hub was last reset.
ports. All values are cumulative since the ESP serial hub was last reset.
To display port statistics:
1.
From the Top Menu, enter
5
to select Status. The Status Menu will be displayed.
2.
Enter
2
to select Port statistics. The Port Selection Menu will be displayed.
3.
Enter the number corresponding to a port or
0
to select all ports.
Displaying Connection Status
The Connection Status display has two sections: Serial Port Active Connection Status and Port
Redirection Connections.
Redirection Connections.
The Serial Port Active Connection Status section includes the information described in Table 4.4
on page 39 for one or all ports.
on page 39 for one or all ports.
The Port Redirection Connections section includes the information described in Table 4.5 on
page 40 about the servers that are connected to one or all of the ESP serial ports. This display is
meaningful only when a serial port is being accessed using the serial redirection
connection method.
page 40 about the servers that are connected to one or all of the ESP serial ports. This display is
meaningful only when a serial port is being accessed using the serial redirection
connection method.
To display connected server information:
1.
From the Top Menu, enter
5
to select Status. The Status Menu will be displayed.
2.
Enter
3
to select Connection Status. The Port Selection Menu will be displayed.
3.
Enter the number corresponding to a port or
0
to select all ports.
Displaying and Using Debug Features
The Debug Menu contains commands to display or control log information, run the datascope
feature or escape to a shell.
feature or escape to a shell.
NOTE: Debug Menu commands should only be used on the advice of Avocent service personnel.
These debug operations are not available in the web interface. You may use the ESP-View
diagnostic utility from the web interface; see ESP-View Diagnostic Utility on page 67.
diagnostic utility from the web interface; see ESP-View Diagnostic Utility on page 67.
To display or control log information:
1.
From the Top Menu, enter
6
to select Debug. The Debug Menu will be displayed.
2.
To display log information provided by the ESP hub applications, enter
1
.