Avocent DB-9 FM - RJ-45 Adapter 210129 Manual De Usuario

58        ESP Serial Hub Installer/User Guide

The Port TCP Client command enables or disables the raw TCP client connection method on one or 
all serial ports. See Table 3.4 on page 19 for parameter descriptions and rules for use.

PORT <port>|ALL TCPCLIENT ENABLE|DISABLE 
DESTIP=<dest_ip> [DESTPORT=<dest_port>] [LOCALPORT=<lport>] 
[CONNECTMODE=AUTO|DATA|DCD] [TIMEOUT=<sec>] [BUFFERING=<hsec>] 
[IDLEBUFFERING ENABLE|DISABLE]

The Port Modem Emulation command enables or disables the modem emulation connection 
method on one or all serial ports. See Table 3.5 on page 21 for parameter descriptions and rules 
for use.

PORT <port>|ALL MODEM ENABLE|DISABLE 
[INCOMING ENABLE|DISABLE] [AUTOANSWER ENABLE|DISABLE] 
[LOCALPORT=<port>] [OUTGOING ENABLE|DISABLE] [DESTIP=<ip_add>] 
[DESTPORT=<dest_port>] [ECHO ENABLE|DISABLE] [VERBOSE=0|1|2|3] 
[RESPONSECODES ENABLE|DISABLE] [MONITORDCD ENABLE|DISABLE] 
[BUFFERING=<hsec>] [TIMEOUT=<sec>]

The Dialout Translation command is used to translate telephone numbers to an IP address and IP 
port. This command is valid only when the modem emulation connection method is enabled and 
outgoing calls are enabled. You may configure up to eight sets for each ESP hub serial port. See 
Dialout translation on page 27 for more information.

DIALOUT_TRANSLATION PORT=<port>|ALL SET=<set_number> 
NUMBER=<translate_string> IPADDR=<ip_add> IPPORT=<dest_port>

The Port Configuration Utility command enables or disables the configuration utility connection 
method on one or all serial ports. See Table 3.9 on page 28 for parameter descriptions and rules 
for use.

PORT <port>|ALL CONFIGUTIL ENABLE|DISABLE [TIMEOUT=<sec>]

The Port Attributes command specifies attributes for one or all serial ports.

PORT <port>|ALL [BAUD=<baud>] [SIZE=<size>] 
[PARITY=NONE|EVEN|ODD|MARK|SPACE] [STOP=1|2] 
[FLOW=NONE|XON/XOFF|RTS/CTS]

See Table 3.10 on page 29 for serial port parameter descriptions and rules for use.