Avocent DB-9 FM - RJ-45 Adapter 210129 Manual De Usuario
Los códigos de productos
210129
64 ESP Serial Hub Installer/User Guide
Commands
Table 7.1 describes the commands that may be used in the ESP-Install program. Many of the
commands contain detailed driver specifications; contact Technical Support for more information.
commands contain detailed driver specifications; contact Technical Support for more information.
Syntax conventions
Keywords and values are not case sensitive.
A command must start on a line by itself. A carriage return marks the end of a command.
A comment must be on a line by itself, and must be preceded with a double slash (//).
Keyword/value pairs may have intervening spaces for readability. For example, all of the following
forms are valid:
forms are valid:
type=esp-8
f1=sendmodemstatus off
type = esp-8
f1 = sendmodemstatus off
Table 7.1: ESP-Install Program Commands
Command
Description
AUTO DEVICE ON|OFF
Enables (ON) or disables (OFF) automatic responses for an unsigned
driver. The default value is ON.
driver. The default value is ON.
DEBUG=[0|1]
Enables (1) or disables (0) inclusion of addition debug information in the
ESPinstall.log file.The default is enabled.
ESPinstall.log file.The default is enabled.
END
Designates the end of the installation/update commands for an ESP hub.
ESP
Designates the beginning of the installation/update commands for an
ESP hub.
ESP hub.
F<port>=NOFLUSH ON|OFF
Enables (ON) or disables (OFF) the NOFLUSH feature for the specified
physical port.
physical port.
F<port>=NOPURGE ON|OFF
Enables (ON) or disables (OFF) the NOPURGE feature for the specified
physical port.
physical port.
F<port>=SENDCOMMSTATUS
ON|OFF
ON|OFF
Enables (ON) or disables (OFF) the SENDCOMMSTATUS feature for the
specified physical port.
specified physical port.
F<port>=SENDMODEMSTATUS
ON|OFF
ON|OFF
Enables (ON) or disables (OFF) the SENDMODEMSTATUS feature for the
specified physical port.
specified physical port.
F<port>=TXDRAIN ON|OFF
Enables (ON) or disables (OFF) the TXDRAIN feature for the specified
physical port.
physical port.
GATEWAY=<gateway>
Gateway address, in dot notation. This command is required when
installing an ESP hub that does not yet have an IP address and is not
located on the local subnet.
installing an ESP hub that does not yet have an IP address and is not
located on the local subnet.
I<port>=RS-232|RS-485|
RS-485RTS|RS-422
RS-485RTS|RS-422
Interface type of the physical port. This command is valid only on multi-
interface hubs that support the specified interface type.
interface hubs that support the specified interface type.