Canon PowerShot G16 Guía Del Usuario

22

To ensure your shots are in focus, always begin by holding the shutter 

button halfway down, and once the subject is in focus, press the button all 

the way down to shoot.

In this manual, shutter button operations are described as pressing the 

button halfway or all the way down.

z

z

Press the shutter button halfway. The 

camera beeps twice, and AF frames are 

displayed around image areas in focus.

z

z

The camera shoots, as a shutter sound 

is played.

z

z

Keep the camera still until the shutter 

sound ends.

Images may be out of focus if you shoot without initially pressing the 

shutter button halfway.

Length of shutter sound playback varies depending on the time 

required for the shot. It may take longer in some shooting scenes,

and images will be blurry if you move the camera (or the subject 

moves) before the shutter sound ends.

To conserve battery power when shooting, you can use the optical 

viewfinder instead of the screen. Shoot the same way as when using the

screen.

z

z

Press the <

p> button several times to 

turn the screen off (

).

z

z

As you look through the optical 

viewfinder, turn the dial one way or the

other so that images look sharp.

The area visible in the optical viewfinder may differ slightly from the

image area in your shots.

At aspect ratios other than 4:3, the area visible in the optical 

viewfinder differs from the image area in your shots. Check the

settings before shooting.

The lens may be partially visible through the optical viewfinder at some zoom

positions.

Although the camera automatically focuses on subjects, face detection and 

focusing is not possible.

Continuous shooting is not supported in [

] mode, because the camera 

will not determine the shooting scene.