Canon PowerShot G16 Guía Del Usuario
94
1
2
3
4
2
3
4
5
6
7
8
9
10
7
8
9
10
Cover
Before Use
Common Camera
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Auto Mode /
Hybrid Auto Mode
Other Shooting
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
•
After you set the shutter speed or aperture value, the exposure level
may change if you adjust the zoom or recompose the shot.
•
Screen brightness may change depending on your specified shutter
speed or aperture value. However, screen brightness remains the
same when the flash is up and the mode is set to [
h].
•
Use a sufficiently charged battery when shooting with the shutter
speed set from 40 to 250 seconds, because the longer shooting
time shortens battery life more than other shooting methods.
•
To have both the shutter speed and aperture value automatically
adjusted to obtain standard exposure, hold the shutter button
halfway and press the < > button. Note that standard exposure
may not be possible with some settings.
•
Images shot at high ISO speeds may look grainy.
•
[
D]: Manual
•
Calculation of standard exposure is based on the specified metering method
(
).
•
The battery level indicated is based on estimated battery consumption under
the current shutter speed setting. Changing the shutter speed may cause this
level to be updated.
•
You can customize camera operation so that turning the <
7> dial adjusts the
shutter speed and turning the <
z> dial adjusts the aperture value (
).
Still Images
Adjusting the Flash Output
Choose from the three flash levels in [
D] mode.
1
Enter [D] mode.
z
z
Set the mode dial to [
D].
2
Configure the setting.
z
z
Raise the flash, press the <
r> button and
immediately turn the <
z> dial to choose
the flash level, and then press the <
m>
button.
z
z
Once the setting is complete, the flash
output level is displayed.
[
]: low, [
]: medium, [
]: high
•
You can also set the flash level by choosing [
X] in the FUNC. menu (
),
4] tab ► [Flash Control] ►
[Flash Output].
•
You can set the flash level in [
M] or [B] mode by accessing MENU
) and choosing [
4] tab ► [Flash Control] ► [Flash Mode] ►
[Manual].
•
You can also access the [Built-in Flash Settings] MENU screen as follows
(except when an optional external flash is mounted).
-
Press and hold the <
r> button for at least one second.
-
When the flash is up, press the <
r> button and immediately press the
<
n> button.