Canon VB-M50B Manual
Setting Page
5
197
This explains functions common to both video detection and auto tracking.
Configuring Operations for “Detected” ([Event] Tab)
Set operations to be performed upon detection of changes in a subject.
(1)
Specify Operation Timing (Multiple Selections Possible)
[ON Event Operation]
When selected, the operations set in (2) are performed when the mode becomes “detected”.
When selected, the operations set in (2) are performed when the mode becomes “detected”.
[OFF Event Operation]
When selected, the operations set in (2) are performed when “detected” mode ends.
When selected, the operations set in (2) are performed when “detected” mode ends.
[Detected mode Operation]
When selected, the operations set in (2) are performed while “detected” mode is active.
When selected, the operations set in (2) are performed while “detected” mode is active.
[Action During Auto Tracking]
When selected, the operations set in (2) are performed while the moving object is automatically tracked.
When selected, the operations set in (2) are performed while the moving object is automatically tracked.
(2)
Specify Event Operation (Multiple Selections Possible)
[E-mail Notification]
When selected, e-mail notification is sent according to the timing set in (1). [Video Record] > [E-mail Notification] in the
When selected, e-mail notification is sent according to the timing set in (1). [Video Record] > [E-mail Notification] in the
Setting Page must be set in advance (P. 160).
[Video Record]
When selected, video recording begins according to the timing specified in (1). [Video Record] > [Upload] (P. 156) or
When selected, video recording begins according to the timing specified in (1). [Video Record] > [Upload] (P. 156) or
[Memory Card] > [Video Record Setting] (P. 215) in the Setting Page must be set in advance.
(3)
Specify Audio Playback Timing
[Audio Playback at ON Event]
When selected, the sound clip specified in (4) is played back when the mode becomes “detected”.
When selected, the sound clip specified in (4) is played back when the mode becomes “detected”.
[Audio Playback at OFF Event]
When selected, the sound clip specified in (4) is played back when “detected” mode ends.
When selected, the sound clip specified in (4) is played back when “detected” mode ends.
(4)
Sound Clip Settings
[Event] > [Intelligent Function]
- Shared Operations -
- Shared Operations -
(1)
(3)
(4)
(5)
(2)
(1)
(3)
(4)
(5)
(2)
Video Detection
Auto Tracking
R13 R12
R13 R12
R13 M50 H652 H651
R13 M50 H652 H651