Canon PowerShot G7 X Mark II Manual

ç

 Contents

 

●

The following Windows settings are configured when you run the 
utility in step 2.

 -

Turn on media streaming. 
This will enable the camera to see (find) the computer to access 
via Wi-Fi.

 -

Turn on network discovery. 
This will enable the computer to see (find) the camera.

 -

Turn on ICMP (Internet Control Message Protocol). 
This allows you to check the network connection status.

 -

Enable Universal Plug & Play (UPnP). 
This will enable network devices to detect each other 
automatically.

 

●

Some security software may prevent you from completing the 
settings as described here. Check the settings of your security 
software.

Connect to your access point via Wi-Fi as follows.

Also refer to the access point user manual.

Confirm that the Wi-Fi router or base station conforms to the Wi-Fi 

Connection methods vary depending on whether the access point 

supports Wi-Fi Protected Setup (WPS, = 344) or not (= 348). 

For non-WPS access points, check the following information.

 

●

Network name (SSID/ESSID)

The SSID or ESSID for the access point you use. Also called 

the “access point name” or “network name”.