Canon DP-V3010 Manual

63

OSD Menu

Item

Setting Options (underline indicates factory default)

Wave Form Monitor

Wave Form Monitor is displayed for SDI signals. On the wave form monitor, the horizontal axis shows
the horizontal resolution of the video and the vertical line shows the signal level.

255

-4%

0%

50%

100%

0

Signal level

Horizontal resolution of video

IRE

Note

•  "Wave Form Monitor" is not displayed in the following cases:

-

When "Frame Hold" or "False Color" is "On"

-

When "Peaking 1" or "Peaking 2" is selected

-

During the execution of "Playback File" under "Screen Capture"

-

When a "Test Pattern" is displayed

-

When "H Delay"/"V Delay" is "On"

•  When "Wave Form Monitor" is "On", "Vector Scope" is "Off".

Enable

Switches the wave form monitor On, Off.
On, Off

Select Signal

Sets the wave form to be displayed.
Y, Cb, Cr, R, G, B

Display Type

Sets the display type. When "Line" is selected, data for one line is displayed.
All, Line
Selects the line to be displayed when "Line" is selected.
  Select Line: 1 to 2160

Position

Selects the display position.
Bottom Left, Bottom Right

Scale

Sets the scale of the wave form monitor.
Automatic: Sets the scale of the wave form monitor according to the Gamma setting.
IRE, Canon Log, Canon Log 2, Canon Log 3, SMPTE ST 2084: Select the scale.

Guide

A guide is displayed at the specified position. "Guide" is not displayed when "255" is selected.
1 to 255

Standard
Level High

Sets the standard display level (high). "Standard Level High" is not displayed when "255" is selected.
190 to 255

Standard
Level Low

Sets the standard display level (low). "Standard Level Low" is not displayed when "0" is selected.
0 to 64