Digitus DN-19 SRV-36U-N Hoja De Datos
DATASHEET
Server Cabinets
DN-19 SRV-36U-N
EAN 4016032217732
The DIGITUS server cabinets are especially
suitable for server and switches with high
installation depth. The reasoned
construction ensures an effectively air
circulation and cooling for installed devises.
The cabinet can be taken apart for easy
entry in small rooms.
- 1.5mm - 2mm strong sheet steel with a high loading capacity, powder coated
- Side sections detachable and lockable
- Ventilation slots for active and passive ventilation and exhaustion
- Protection rating IP 20
- Perforated steel front door, opening angle 180° with lockables wing handle
- Perforated double-wing steel rear doors
- Spring-mounted hinges enable easy installation of the door or door change
- 3-point locking system, optionally available with cylinder lock
- Suitable for all server types with 19" mounting
- 483mm (19") profile rails on the front side, adjustable in depth
- Large cable entry with rubber-edged sliding mechanism on the floor
- Height-adjustable levelling feet for the equalisation of uneven floors
- Tilt-prevention mechanism when pulling out servers
- Roof module for ventilation unit
- Including set of 28 x 483mm (19") assembly screws
- Complying with international standards IEC 297-1/2 and IEC 917-2-1
- Extensive range of accessories available
- Color: light grey, RAL 7035
- Loading capacity: 1000kg
- Units: 36
- Dimensions (HxWxD): 1783mm
- Side sections detachable and lockable
- Ventilation slots for active and passive ventilation and exhaustion
- Protection rating IP 20
- Perforated steel front door, opening angle 180° with lockables wing handle
- Perforated double-wing steel rear doors
- Spring-mounted hinges enable easy installation of the door or door change
- 3-point locking system, optionally available with cylinder lock
- Suitable for all server types with 19" mounting
- 483mm (19") profile rails on the front side, adjustable in depth
- Large cable entry with rubber-edged sliding mechanism on the floor
- Height-adjustable levelling feet for the equalisation of uneven floors
- Tilt-prevention mechanism when pulling out servers
- Roof module for ventilation unit
- Including set of 28 x 483mm (19") assembly screws
- Complying with international standards IEC 297-1/2 and IEC 917-2-1
- Extensive range of accessories available
- Color: light grey, RAL 7035
- Loading capacity: 1000kg
- Units: 36
- Dimensions (HxWxD): 1783mm