ASUS RS724Q-E7/RS12 Manual De Usuario

5-28

Chapter 5: BIOS setup

5.4.11 WHEA Configuration

Enable or disable Windows

Hardware Error Architecture.

WHEA Support

[Enabled]

WHEA Support [Enabled]

Allows you to enable or disable the Windows Hardware Error Architecture support.

Configuration options: [Disabled] [Enabled]

5.4.12 APM setting

Specify what state to go to

when power is re-applied after

a power failure (G3 state).

Restrore AC Power Loss

[Last State]

Power On By PCIE

[Disabled]

Power On By Ring

[Disabled]

Power On By RTC

[Disabled]

Restore AC Power Loss [Last State]

When set to [Power Off], the system goes into off state after an AC power loss.

When set to [Power On], the system will reboot after an AC power loss. When set

to [Last State], the system goes into either off or on state, whatever the system

state was before the AC power loss.

Configuration options: [Power Off] [Power On] [Last State]

Power On By PCIE [Disabled]

[Disabled]

Disables the PCIE devices to generate a wake event.

[Enabled]

Enables the PCIE devices to generate a wake event.

Resume On By Ring [Disabled]

When set to [Enabled], the system will generate a wake event when the external

modem receives a call while the computer is in Soft-off mode.

Configuration options: [Disabled] [Enabled]

Power On By RTC [Disabled]

[Disabled]

Disables RTC to generate a wake event.

[Enabled]

When set to [Eanbled], the items RTC Alarm Date (Days) and

Hour/Minute/Second will become user-configurable with set

values.

Advanced