ASUS TS300-E7/PS4 Manual De Usuario

Chapter 2:  Hardware setup

2-18

DO NOT remove the backplane unless necessary!

1.  Remove all hot-swap HDD trays 

from the chassis.

2.  Disconnect all cables from the 

SATA/SAS backplane.

3.  Loosen the four screws on the 

backplane.

4.  Firmly hold the backplane, lift it up 

and remove it from the module.

5.  Follow the previous instructions in 

reverse to reinstall the backplane.

6.  Push the tray lever until it clicks, 

and secures the drive tray in place. 

The drive tray is correctly placed 

when its front edge aligns with the 

bay edge.

7.  Repeat steps 1 to 6 if you wish to 

install a second SATAII/SAS drive.