ASUS P7H55-M/USB3 Manual De Usuario

Descargar
Página de 78
Chapter 2: BIOS information
2-23
2.6.3 
ACPI APIC Support [Enabled]
[Disabled] 
When set to [Disabled], the system disable the Advanced Configuration and  
 
Power Interface (ACPI) support in the Advanced Programmable Interrupt  
 
Controller (APIC).
[Enabled] 
When set to [Enabled], the ACPI APIC table pointer is included in the RSDT  
 
pointer list.
2.6.4 
Anti Surge Support [Enabled]
Allows you to enable or disable the Anti-Surge protection feature.  
Configuration options: [Disabled] [Enabled]
2.6.5 
APM Configuration
Restore On AC Power Loss [Power Off]
[Power Off] 
The system goes into off state after an AC power loss.
[Power On] 
The system goes into on state after an AC power loss.
[Last State] 
The system goes into either off or on state, whatever the system state was  
 
before the AC power loss.
Power On By RTC Alarm [Disabled]
[Disabled] 
Disables RTC to generate a wake event.
[Enabled] 
When set to [Enabled], the items 
RTC Alarm Date (Days) / System Time  
 
will become user-configurable with set values.
Power On By External Modems [Disabled]
[Disabled] 
Disables to power up the computer when the external modem receives a  
 
call while the computer is in Soft-off mode.
[Enabled] 
The computer could be powered up when the external modem receives a  
 
call while the computer is in Soft-off mode.
The computer cannot receive or transmit data until the computer and applications are fully 
running. Thus, connection cannot be made on the first try. Turning an external modem 
off and then back on while the computer is off causes an initialization string that turns the 
system power on. 
Power On By PCI Devices [Disabled]
[Disabled] 
Disables the PME to wake up from S5 by PCI devices.
[Enabled] 
Allows you to turn on the system through a PCI LAN or modem card. This  
 
feature requires an ATX power supply that provides at least 1A on the  
 
+5VSB lead.
Power On By PCIE Devices [Disabled]
Allows you to enable or disable the PCIE devices to generate a wake event. 
[Disabled] 
Disables the PCIE devices to generate a wake event.
[Enabled] 
Enables the PCIE devices to generate a wake event.