ASUS P7H55-M/USB3 Manual De Usuario
華碩 P7H55-M/USB3 主板使用手冊
2-25
CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
本系列主板具有電壓監控的功能,用來確保主板以及 CPU 接受正確的電壓準位,
以及穩定的電流供應。
2.7
啟動菜單(Boot)
本菜單可讓您改變系統啟動設備與相關功能。請選擇所需的項目並按下 <Enter>
鍵以顯示子菜單項目。
2.7.1 啟動設備順序(Boot Device Priority)
1st ~ xxth Boot Device [Removable Dev.]
本項目讓您自行選擇啟動盤並排列開機設備順序。依照 1st、2nd、3rd 順序分別
代表其開機設備順序。屏幕上顯示的設備數量依據系統中安裝的設備而定。設置值
有:[Removable Dev.] [Hard Drive] [ATAPI CD-ROM] [Disabled]
有:[Removable Dev.] [Hard Drive] [ATAPI CD-ROM] [Disabled]
‧ 要選擇系統開機的啟動設備,請在 ASUS 的圖標出現時按下 <F8>。
‧ 要以 Safe Mode 進入 Windows
®
操作系統,請進行以下任一操作:
‧
當 ASUS 的圖標出現時按下 <F5>。
‧
開機自檢完成後,按下 <F8>。
2.7.2 啟動選項設置(Boot Settings Configuration)
Quick Boot [Enabled]
本項目可讓您決定是否要略過主板的自檢功能(POST),開啟本項目將可加速開
機的時間。當設置為 [Disabled] 時,BIOS 程序會執行所有的自檢功能。設置值有:
[Disabled] [Enabled]
[Disabled] [Enabled]
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
P7H55-M/USB3 BIOS Setup
Main Ai Tweaker Advanced Power
Boot
Tools Exit
Specifies the Boot
Device Priority
sequence.
A virtual floppy disk
drive (Floppy Drive B:
) may appear when you
set the CD-ROM drive
as the first boot
device.
←→ Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Boot Settings
Boot Device Priority
Boot Settings Configuration
Security
Version 0306