ASUS ROG MAXIMUS VIII HERO ALPHA Manual De Usuario

1-34

Chapter 1: Product Introduction

These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s 

signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 

configuration with the Intel

®

 Rapid Storage Technology through the onboard Intel

®

 

Z170 chipset.

• 

These connectors are set to [AHCI] by default. If you intend to create a Serial ATA 

RAID set using these connectors, set the SATA Mode Selection item in the BIOS to 

[RAID]. Refer to section SATA Configuration for details.

• 

Before creating a RAID set, refer to section RAID configurations or the manual 

bundled in the motherboard support DVD.

• 

When using NCQ, set the SATA Mode in the BIOS to [AHCI]. Refer to section SATA 

 for details.