ASUS BE239QLB Guía Del Usuario

2-6

Chapter 2: Setup

Connect the cables as the following instructions:

•. To.connect.the.power.cord: Connect one end of the power cord securely to 

the monitor’s AC input port, the other end to a power outlet. 

•. To.connect.the.VGA/DVI/DisplayPort.cable: 

a.  Plug one end of the VGA/DVI/DisplayPort cable to the monitor’s VGA/

DVI/DisplayPort jack.

b.  Connect the other end of the VGA/DVI/DisplayPort cable to your 

computer's VGA/DVI/DisplayPort jack.

c.  Tighten the two screws to secure the VGA/DVI connector.

•. To.connect.the.audio.cable:.connect one end of the audio cable to the 

monitor’s Audio-in port, the other end to the computer’s audio-out port.

•. To.use.the.earphone: connect the end with plug type to the monitor’s 

earphone jack when an HDMI or DisplayPort signal is fed.

•. To.use.the.USB.2.0.ports: Take the supplied USB 2.0 cable, and plug 

the smaller end (type B) of the USB upstream cable to the monitor’s USB 

upstream port, and the larger end (type A) to your computer’s USB 2.0 port. 

Make sure your computer is installed with the lastest Windows 7/Windows 8 

operating system. That will enable the USB ports on the monitor to work. 

When these cables are connected, you can choose the desired signal 

from the Input Select item in the OSD menu.