ASUS ESC4000 G3 Manual De Usuario

2-13

ASUS ESC4000 G3/G3S Series

The ESC4000 G3 system supports hot-swap 3.5-inch SATA/SAS hard disk drives. The hard 

disk drive installed on the drive tray connects to the motherboard SATA/SAS ports via the 

SATA/SAS backplane.

To install a hot-swap SATA/SAS HDD:

1. 

Press the spring lock (A) then pull the 

tray lever outward (B) to release the 

drive tray. The drive tray ejects slightly 

after you pull out the lever.

2. 

Firmly hold the tray lever and pull the 

drive tray out of the bay.

3. 

Place the drive tray on a flat and 

stable surface. 

4. 

Prepare the SATA/SAS HDD and the 

bundled set of screws.

5. 

Place the SATA/SAS HDD into the tray 

(A) then secure it with four screws (B).