Canon imageRUNNER 1435i Manual

Setting a Remote UI PIN

You.can.set.a.PIN.for.access.to.the.Remote.UI..All.users.use.a.common.PIN.

NOTE
When.Department.ID.Management.is.enabled,.setting.here.is.not.required..For.more.information,.see.“Setting.
the.Department.ID.Management”.in.the.e-Manual..

Start the Remote UI and log on in System Manager Mode. (See “Starting the Remote UI” in the

e-Manual.)

Click [Settings/Registration].

Click [Security Settings] [Remote UI Settings].

Click [Edit].

Select the [Use Remote UI Access PIN] check box and set the PIN.

[Use Remote UI Access PIN]

If.you.select.this.check.box,.you.must.enter.a.PIN.to.access.the.Remote.UI.

[Set/Change PIN]

To.set.a.PIN,.select.the.check.box.and.enter.a.number.of.up.to.seven.digits.both.in.the.[PIN].and.[Confirm].text.
boxes.

Click [OK].

NOTE
If.PIN.is.forgotten:
Set.a.new.Remote.UI.Access.PIN.in.the.settings.menu.on.the.operation.panel..Perform.the.following.operation.

on.the.machine:.Press.

. .<System.Management.Settings>. .<Remote.UI.Settings>. .<Remote.UI.Access.

Security.Settings>. .<On>. .Enter.PIN. .<Apply>. .Enter.PIN.(Confirm). .<Apply>. .

If.Remote.UI.settings.are.initialized:
The.Remote.UI.Access.PIN.is.also.initialized..After.an.initialization,.reset.the.PIN..(See.“Initializing.Menu”.in.the.
e-Manual.)