Canon PIXMA MX532 Manual

XXXXXXXX

© CANON INC. 2014

Press the   button to display the Setup menu.
Use the [] button to select 

Fax settings, then press the OK button.

Use the [] button to select 

Easy setup, then press the OK button.

Use the [] button to select 

Start setup, then press the OK button.

Easy setup starts up.

Follow the on-screen instruction to complete the settings in accordance with the 

operating environment.

Read this manual after finishing the operation of 

Getting Started.

To use the fax features of the machine, you can enter the fax settings through the 

Easy setup.

Connect the machine to a telephone jack with the supplied telephone line cable, 

then press the 

OK button.

A basic connection method is shown in this figure. For other connection 

methods, refer to the 

Online Manual.

Users in Europe: If you prepare your own telephone line cable, be sure it is a 

6-wire telephone line cable.

•

•

If you want to connect a telephone or an answering machine, remove the Cap, 

connect a telephone or an answering machine with a telephone line cable and 

press the 

OK button.

If you do not want to connect a telephone or an answering machine, just press 

the 

OK button.

Do not use a telephone jack line duplexer.

Users in the UK: Use a B.T. adapter for connection as required.

•

•

If you want to connect to:

the telephone jack on the wall directly

a PBX extension line or an xDSL splitter

Use the [] button to select 

Telephone line, then press the OK button.

•

•

If you want to connect to:

an internet telephone

an xDSL modem

an ISDN line

Use the [] button to select 

IP telephone line, then press the OK button.

•

•

•

You can select 

Touch tone or Rotary pulse.

Use the [] button to select your 

Telephone line type, then press the OK button.

If you want to use an answering machine,

Use the [] button to select 

Use, then press the OK button.

If you do not want to use an answering machine,

Use the [] button to select 

Do not use, then press the OK button.

After finishing 

Easy setup, enter the Setup menu again and make other settings.

Press the   button to display the Setup menu.
Use the [] button to select 

Fax settings, then press the OK button.

Use the [] button to select 

FAX user settings, then press the OK button.

Use the [] button to select 

Unit TEL no. registr., then press the OK button.

Use the Numeric buttons to enter the sender fax number, then press the 

OK button.

Use the [] button to select 

Unit name registr., then press the OK button.

Use the Numeric buttons to enter the sender name, then press the 

OK button.

You can select the receive mode suitable for your fax use conditions.

DRPD is available only in the US and Canada.

Network switch may not be available depending on the region or country.

The telephone may not ring when a call incomes depending on the type or settings of the external telephone.

•

•

•

Press the   button.
Press the 

Menu   button.

Use the [] button to select 

Receive mode set., then press the OK button.

Use the [] button to select the receive mode you want to set, then press the 

OK button.

The confirmation screen asking whether to make advanced settings is displayed.

If you select 

Yes and press the OK button, you can specify the advanced settings of each receive mode.

The machine automatically receives faxes after the external device rings a specified length of time. You can specify the length of time.

The machine switches fax reception automatically after the answering machine connected to the machine answers.

Specify the ring pattern to match the DRPD service pattern assigned by your telephone company.

You can specify the number of times the external device rings when incoming.

You can specify the number of times the external device rings when incoming.

You can specify the number of times the external device rings when incoming.

•

•

•

•

•

•

When using a telephone and a fax with the same 

telephone number:

When a call incomes and the connected telephone rings, pick up the 

handset.

If the call is a voice call, talk on the telephone.

If the call is a fax, hang up the handset after the machine starts receiving 

the fax.

DRPD or Network switch

When using a fax with the telephone number 

subscribing to a ring pattern detection service:

When a call incomes, the machine detects whether the call is a fax call. If 

the call is a fax, the machine will receive the fax automatically.

If the machine does not detect the fax ring pattern, the telephone will 

continue ringing. Answer the telephone.

When using the machine for a telephone number for 

fax only:

When a fax incomes, the machine will receive the fax automatically.

For details on the sender information and receive mode, and setting the date/time, refer to the 

Online Manual.

QT5-6692-V01

PRINTED IN XXXXXXXX