Canon VB-R11VE Manual

198

You can save up to 8 privacy masks.

Change/Delete a Privacy Mask



How to Select a Privacy Mask

There are two ways to select a privacy mask area.

• Click the privacy mask area you want to change in the privacy mask registration area.

• Keep clicking [Next] until you select the privacy mask area you want.

To add privacy mask areas, repeat steps 2 to 5.

Important

• Check privacy mask settings again if you change the [Basic Settings] > [Video Settings] > [All Videos] > [Video Size Set] 

settings on the Setting Page.

• You will need to set the position of the privacy mask again if you change the [Image Flip] setting in [Camera] > [Camera 

Settings] > [Installation Conditions] on the setting page.

• If you reconfigure privacy mask settings after you changed the [Camera] > [Camera Settings] > [Camera Control] > [Image 

Stabilizer] on the setting page, reconfigure all privacy mask positions and sizes.

• After registering a privacy mask, pan, tilt and zoom the camera to confirm the areas you want to mask do not become visible 

when the camera direction is altered.

• Privacy masks may deviate slightly from the specified position depending on the zoom position.

• If you change the privacy mask settings after saving a panorama image using the Panorama Creation Tool, you must use the 

Panorama Creation Tool to recreate the panorama image.

Privacy mask 
registration area

Privacy Mask Areas

R11

R10

Privacy Mask Areas