Canon VB-R11 Manual

S

ett
ing Page

4

115

[OFF Event Operation]
If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be executed according to their settings when 

a linked event (OFF event) is completed.

[Ongoing ON Event Operation]

Select the operation to be performed when an ON event is triggered.

If [Enable] is selected, [Video Record] and [E-mail Notification] will be executed according to their settings during the 

linked event.

[Preset]
If you specify a preset, the camera angle will automatically move to the preset location when a linked event is 

triggered.

It is necessary to set presets beforehand with [Control for Admin] > [Preset/Initial Setting] > [Preset Setting] (P. 170).

Note

This cannot be set when [Event Type] is set to [Intelligent Function].

[Video Record]
Select whether to record video depending on the linked event.

If you select [Enable] and a linked event is triggered, video will be transmitted to the recording destination specified 

in [Video Record Action] (P. 96).

[E-mail Notification]
Select whether to send an e-mail notification depending on the linked event.

If you select [Enable] and a linked event is triggered, an e-mail notification will be sent.

To use e-mail notification, you must set [Video Record] > [E-mail Notification] (P. 102) beforehand.

[External Device Output for ON Event]

Select whether external device output (1 or 2) is active or inactive when an ON event is triggered.

[External Device Output for OFF Event]

Select whether external device output (1 or 2) is active or inactive when an OFF event is triggered.

[Audio Playback at ON Event]
If you select [Enable], the sound clip specified in [Sound Clip] will play back when a linked event is triggered.

Note

This can only be set when [Event Type] is set to [External Device Input] or [Intelligent Function].

[Audio Playback at OFF Event]
If you select [Enable], the sound clip specified in [Sound Clip] will play back when a linked event completes.

[Sound Clip]
Select the sound clip when [Audio Playback at ON Event] or [Audio Playback at OFF Event] has been set to [Enable].

You must register the sound clip with [Video and Audio] > [Audio Settings] (P. 88) beforehand.

[Volume]

Enter the volume for the sound clip.

Linked Event Operation Examples

This shows linked event status examples according to the ON/OFF combinations for Event 1 and Event 2.

In the examples below, [Event Gap] is 4 seconds and each cell in the graph below represents 1 second.



[Event Linking Method] Set to [OR]

Only One Event ON

R11

ON

Event 1

Event 2

Consolidated

state

OFF
ON
OFF

ON
OFF