Canon VB-R11 Manual
Admin Viewer/VB Viewer
5
153
• The [Viewer PTZ] button display will change as follows depending on whether or not you are using the Viewer PTZ.
You are not using the Viewer PTZ (video being received by the camera appears in the video display area)
You are using the Viewer PTZ (magnified video appears in the video display area)
Cropping and Displaying Part of an Image (Digital PTZ)
You can use the Digital PTZ panel to crop and display part of a camera image in the image display area. It is also possible
to use a preset or home position registered to the camera.
Digital PTZ
Digital PTZ is a function that allows easy panning, tilting, and zooming by transmitting only a part of the camera
effective pixel area without moving the camera lens position that was adjusted during camera installation.
Note
If Digital PTZ is enabled while receiving H.264 video, the received video changes to JPEG format.
Differences Between Digital PTZ and Viewer PTZ
Digital PTZ and Viewer PTZ are both functions allowing easy panning, tilting and zooming using the digital zoom, but
they have the following differences because they employ different operating principles.
Crop Video With Digital PTZ Panel
The Digital PTZ panel appears.
The preview frame operations are the same as with the Viewer PTZ (P. 152).
The preview frame size can be set to any of 5 sizes. The screen sizes that can be selected change as follows
depending on the setting in [Basic Settings] > [Video Settings] > [All Videos] > [Video Size Set] on the Setting
Page.
• [1280 x 720 / 640 x 360 / 320 x 180] selected: 640x360, 512x288, 384x216, 256x144, 128x72
• [1280 x 960 / 640 x 480 / 320 x 240] selected: 640x480, 512x384, 384x288, 256x192, 128x96
Note
The preview frame will move in steps. Fine-tuned movement is not possible.
The video of the area inside the manipulated preview frame is magnified to fill the video display area.
M641 M640 M741 M740
Digital PTZ
Viewer PTZ
Transmits only the cropped part of the entire area that
can be captured by the camera.
can be captured by the camera.
Enlarges the specified part of the video transmitted from
the camera and then displays it in the viewer.
the camera and then displays it in the viewer.
The size of the received data is small.
The size of the received data is large.
Independent operation cannot be performed by each
Viewer. If multiple Viewers are connected, the same
Digital PTZ display is applied to the other Viewers.
Viewer. If multiple Viewers are connected, the same
Digital PTZ display is applied to the other Viewers.
PTZ operation can be performed independently for each
Viewer.
Viewer.
1
Click the [Digital PTZ] button.
2
In the Digital PTZ panel, move and resize the preview frame.
M641 M640 M741 M740