Canon VB-R11 Manual

162

* Using infrared illumination from an external device may throw the camera out of focus.

For details on focus ranges, please refer to the table on P. 55.

Note

• For details on difficult to focus subjects, please refer to “Difficult to Focus Subjects” (P. 55).

• It is recommended that you check that the camera is focused whenever you restart the camera or use One-shot AF.

Exposure

Set the exposure and shutter speed.

(1)

Exposure mode

[Auto]

The exposure is controlled automatically.

[Manual]

The exposure is set by adjusting the shutter speed, aperture and gain manually.

This is not available if [Smart Shade Control] (P. 159) is set to [Auto].

[Auto (Flickerless)]
Shutter speed is adjusted automatically to suit the lighting conditions. Video flickering caused by fluorescent lights, 

etc., is reduced.

[Auto (Shutter-priority AE)]
The aperture is adjusted automatically to suit the specified shutter speed.

Note

If [Auto] is selected in [Camera] > [Initial Setting] > [Day/Night] on the Setting Page, select [Auto], [Auto (Flickerless)] or [Auto (Shutter-
priority AE)] for [Exposure].

(2)

[Exposure Compensation]
When you select [Auto], [Auto (Flickerless)] or [Auto (Shutter-priority AE)] for [Exposure], you can adjust the brightness 

of the video by using the slider to select the exposure compensation.

Focus Mode

Day/Night Settings

Day Mode

Night Mode

Max. Wide-Angle

Max. Telephoto

Max. Wide-Angle

Max. Telephoto

Auto/Manual

0.3 m (12 in.) – 
infinity

2.0 m (6.6 ft.) – 
infinity

1.0 m (3.3 ft.) – 
infinity

2.0 m (6.6 ft.) – 
infinity

Fixed at Infinity

Fixed near infinity*

R11

R10

M641 M640 M741 M740

(1)

(2)

(3)

(4)

(5)

(6)

(7)