Canon VB-R11 Manual

Admin Viewer/VB Viewer

5

177

Presets registered in advance can be executed at a specified time or when events trigger the switching of Day/Night Mode. 

Preset camera settings are also applied.

Configure [Auto Control Settings]

Select the [Switch Day/Night] or [Timer] preset in the [Auto Control Settings] tab, and click the [Save settings]. You can 

register up to 4 timer preset auto controls.

(1)

[Switch Day/Night]

Select each registered preset to be executed when switching to Day Mode or Night Mode using auto control.

(2)

[Timer 1] to [Timer 4]

To use a preset at a specified time, set the time in 24-hour format and select the preset.

Automatically Move to a Preset Position at a Specified Time 
(Auto Control Settings)

Important

If both [Switch Day/Night] and [Day/Night] > [Day/Night Focus Settings] > [Focus control when switching Day/Night Mode] (P. 165) have 
been set, [Focus control when switching Day/Night Mode] will be given priority.

Important

• You cannot specify the same time multiple times in [Timer 1] to [Timer 4].

• If the [Timer] set here, and the [Timer] in in the Setting Page are set on the same time, the timer in the Setting Page will have priority.

Example)

– [Event] >[Timer] > [Start Time] is set to [2:00] in the Setting Page, select [preset2] as the [Start Time preset]
– [Timer] > [Time] is set to [2:00] in the [Auto Control Settings] tab, and Preset is set to [preset1].
Result: Preset 2 will run at 2:00.

(4)

(3)

(1)

(2)