Canon VB-R11 Manual

78

[LED Setting] 
Select whether to enable or disable the camera operation status LED.

The LED will light for several seconds when starting the camera even if set to [Turn Off].

[Image Flip]

Select whether or not to vertically flip the video.

Select the setting suited to the camera installation method, such as ceiling mounting or placing on a desk.

Camera Position Control

Settings for camera use when there are no camera control restrictions for users or requests for camera control privileges.

[Restricted to Presets] 

Restricts camera control of the camera angle, such as with VB Viewer, to presets, including the home position, for users 

other than administrators.

[Camera Position without Control]
Select the camera operation when there are no users with camera control privileges.

If [Return to Home Position] has been selected, the home position of the camera must be set in advance with [Control for 

Admin] > [Preset/Initial Setting] > [Preset Setting] > [Preset Registration] tab (P. 170).

External Input Device 1, 2   

Enter each device name in order to identify the corresponding external input device being connected.

There are 2 external input device terminals on the camera.

[Device Name]
Enter the name of the device connected to the external input device terminal. Be sure to enter a name in [Device Name 

(alphanumeric characters)].

External Output Device 1, 2   

Enter each device name in order to identify the corresponding external output device being connected.

There are 2 external output device terminals on the camera.

[Device Name]

Enter the name of the device connected to the external output device terminal. Be sure to enter a name in [Device Name 

(alphanumeric characters)].

M741 M740

R11

R10

R11 M641 M741

R11 M641 M741