Canon Wi-Fi Adapter W-E1 Manual
46
Connecting to a Detected Network Manually
4
Select an access point.
Use <9> to select the access point
to connect to from the list of access
points.
to connect to from the list of access
points.
(1) SSID
(2) An icon is displayed if the access point is encrypted
(3) Channel used
(2) An icon is displayed if the access point is encrypted
(3) Channel used
[Refresh] and [Manual settings]
Scroll down the screen in step 4 to display [Refresh] and [Manual
settings].
settings].
To search for access points again, select [Refresh].
To configure settings for the access point manually, select [Manual
settings]. Enter the SSID using the virtual keyboard and then
configure settings following the instructions displayed.
settings]. Enter the SSID using the virtual keyboard and then
configure settings following the instructions displayed.
(1)
(2) (3)
For [Camera access point mode] displayed in step 4, see page 50.