Canon VB-M720F Manual
Installation
2
41
Configure the following settings after installing this software according to the operating system you are using.
Windows Firewall Settings
If you install the Storage Server and the Viewer on different computers, you must change the Windows Firewall settings on
the computer used for the Storage Server.
During installation, select [Add storage server programs to the Windows Firewall exception list. ] to complete settings. If you
did not select the above check box during installation, perform the following procedure to change the Windows Firewall
settings.
The following settings are not required if you install the Storage Server and Viewer onto the same computer.
When using Windows 7, Windows 8, Windows 10, Windows Server 2008
R2, or Windows Server 2012
R2, or Windows Server 2012
When using Windows Vista or Windows Server 2008
If the [Control Panel] is set to [Classic View], double click [Windows Firewall].
If the [User Account Control] dialog box is displayed, click [Continue].
Settings After Installation
1
Click [System and Security] in the [Control Panel], and then click [Windows Firewall].
2
Click [Advanced Settings] to display the [Windows Firewall with Advanced Security] window.
3
Click [Inbound Rules] and select [New Rule] from the [Action] menu to start the [New Inbound Rule Wizard].
4
Click [Port], and then click [Next].
5
Click [TCP] and [Specific local ports], and then enter 80 as the port number. Then click [Next].
6
Click [Allow the connection], and then click [Next].
7
Click [Next].
8
Enter a name (such as the Storage Server or Storage Server Group name) in [Name] and click [Finish].
9
The added inbound rule should be displayed in the [Windows Firewall with Advanced Security] window, with a
checkmark icon displayed next to the rule.
checkmark icon displayed next to the rule.
1
Click [Start] > [Control Panel] to open the [Control Panel].
2
Click [System Security] > [Windows Firewall].
3
Click [Change settings].
4
Click the [Exceptions] tab and click [Add Port].
5
In the [Add a Port] dialog box, enter the name of the Storage Server and 80 as the port number. Make sure that
[TCP] is selected and click [OK].
[TCP] is selected and click [OK].