Canon imageCLASS MF7460 Manual

2-8

If you are placing the original on the platen glass, the size of the 
original is detected after the feeder is closed. Make sure to close 
the feeder before scanning.
Open the feeder and remove the original from the platen glass 
when scanning is complete.

The machine cannot detect the size of STMT and STMTR originals 
that are placed on the platen glass. After pressing   (Start), 
follow the instructions on the screen to specify the original size. 
You can also manually select the paper size.

–

–

–

If the same original is fed through the feeder repeatedly, the 
original may fold or become creased, and make feeding 
impossible. Limit repeated feeding to a maximum of 30 times 
(this number varies, depending on the type and quality of the 
original).

If the feeder rollers are dirty from scanning originals written in 
pencil, perform the feeder cleaning procedure. (See “Cleaning the 
Machine,” on p. 9-2.)

Always smooth out any folds in your originals before placing 
them into the feeder.

Set the originals one by one if they are very thin (10 to 16 lb (37 
to 52 g/m

2

)) or very thick (28 to 32 lb bond (105 to 128 g/m

2

)).

11" x 17" and LGL originals must be placed horizontally in the 
feeder.

■

–

–

–

–

–