Canon TX-20 Full Auto Tonometer Manual

5TypesofMeasurements

67

You can set patient No., patient No. display, patient No. count up, output at measurement error, reset, 
in the Patient No. menu screen. 

The patient No. is a number to identify patients. You can set any number from 000001 to 999999 
and you can set the number to increase by one each time a measurement is done. Patient No. can 
be checked on the Measurement screen, MENU screen, printed data, and data output to external 
devices. 

MENU screen > 

 Patient tab > [Patient No.] 

Setting items 

Description 

Factory 

settings 

Display

Set the display of the patient No. on the Measurement screen and 
whether to increase the numbers in series. 
Increase the number after measurement when the PRINT button or the 
CLS key is pressed. 

[ON]: Displays. Numbers increase serially. 
[OFF]: Does not display. Numbers do not increase serially. 

ON

Count up on 
Error

Set whether to increase the patient number serially even if the 
measurement results are just an error. 

[ON]: The patient No. increases serially. 
[OFF]: The patient No. does not increase serially. 

ON

No.

Set the patient No. 
[000001 to 999999]: Six-digit number

1

Reset No.

Set the patient No. to “000001”. For this setting, press the measurement 
button to display the message screen and you can select reset. 

[OK]: Resets.
[CANCEL]: Does not reset. 

L-IE-5191C_TX-20.indb   67

2013/07/18   13:10:37