Canon PowerShot SX610 HS Red Manual
104
Before Use
Basic Guide
Advanced Guide
Wi-Fi Functions
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
8
Check the confirmation number and
complete the setup process.
●
On screen 2 of step 6, press the [ ][ ]
buttons to choose [OK], and then press
the [
buttons to choose [OK], and then press
the [
] button. The confirmation number
is displayed.
●
Make sure the confirmation number on
the camera matches the number on the
smartphone or computer.
the camera matches the number on the
smartphone or computer.
●
Press the [ ][ ] buttons to choose [OK],
and then press the [
and then press the [
] button.
●
Complete the setup process on the
smartphone or computer.
smartphone or computer.
●
[
] (
GATEWAY are now added as
destinations, and the [
destinations, and the [
] icon changes
to [
].
●
A message is displayed on the
smartphone or computer to indicate that
smartphone or computer to indicate that
this process is finished. To add other
Web services, follow the procedure
in “Registering Other Web Services”
(
Web services, follow the procedure
in “Registering Other Web Services”
(
●
Connections require that a memory card with saved images be in
the camera.
the camera.
●
You can change the camera nickname displayed on the screen in
step 3 (
step 3 (
●
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the menu. Press
the [ ][ ] buttons to access the device selection screen and then
configure the setting.
destinations will be listed first when you access the menu. Press
the [ ][ ] buttons to access the device selection screen and then
configure the setting.
4
Choose [
].
●
Press the [
][
][ ][ ] buttons to choose
[
], and then press the [
] button.
5
Choose [Authenticate].
●
Press the [ ][ ] buttons to choose
[Authenticate], and then press the [
[Authenticate], and then press the [
]
button.
6
Establish a connection with an
access point.
●
Connect to the access point as described
in steps 5 – 7 in “Using WPS-Compatible
Access Points” (
in steps 5 – 7 in “Using WPS-Compatible
Access Points” (
●
Once the camera is connected to CANON
iMAGE GATEWAY via the access point,
an authentication code is displayed.
iMAGE GATEWAY via the access point,
an authentication code is displayed.
●
Keep this screen displayed until step 7 is
complete.
complete.
7
Enter the authentication code.
●
On the smartphone or computer, enter
the authentication code displayed on the
camera and go to the next step.
the authentication code displayed on the
camera and go to the next step.
●
A six-digit confirmation number is
displayed.
displayed.