Canon Océ VarioPrint 6000+ Series Manual
Operator Manual
Page 36
4. Three settings can be altered:
Activation/deactivation of the jogger + adjustment of the amplitude of the vibration:
The vibration of the jogger plate straightens the sheets in the paper bundle into
a properly squared-off block.
By pressing
or
, the operator can activate or deactivate the vibration of
the jogger plate.
Using the bar graph
Using the bar graph
, the user can modify the amplitude of the
vibration.
Cover suction level:
Using the bar graph
, the level of suction used to pick up the cover can
be changed.
By default, the suction level is set with the value “AUTO”, which means the
By default, the suction level is set with the value “AUTO”, which means the
suction adapts according to the cover to be picked up.
Adjusting the cover position:
Using this function, the edge of the cover can be aligned with the book.
The position can be adjusted by up to ± 10 mm in steps of 0.2 mm.
Example : If the front cover overlaps the front of the book by 1 mm, the operator
can make a correction of 1 mm to align the front cover with the book.
This adjustment only affects the position of the cover in relation to the
book; creases remain centred on the spine of the book.
Button -
Button +