Canon Color imageCLASS LBP7110Cw Manual

FT6-0786   (020) 

XXXXXXXXXX 

Copyright CANON INC. 2014 

PRINTED IN CHINA

  SPA 

 

 

Por favor, lea esta guía antes de usar este producto.

 

 

Después de leer esta guía, guárdela en un lugar seguro para posteriores consultas.

Please read this guide before operating this product.
After you finish reading this guide, store it in a safe place for future reference.

 

SPA

 

Guía de instalación rápida

 

SPA

 

Antes de instalar la impresora, lea detenidamente las 
precauciones indicadas a la derecha.

Before installing the printer, read the cautions 
carefully which are described on the right side.

  SPA  Descargue el manual y el controlador de impresora 

más recientes del sitio web de Canon.

Download the latest manual and printer driver from 
the Canon Web site.

Indicates a warning concerning operations that may lead to 
death or injury to persons if not performed correctly. To use the 
machine safely, always pay attention to these warnings.

Indicates a caution concerning operations that may lead to injury 
to persons if not performed correctly. To use the machine safely, 
always pay attention to these cautions.

-  Do not install the printer in a location near alcohol, paint thinner, or other 

flammable substances. If flammable substances come into contact with 
electrical parts inside the printer, this may result in a fire or electrical 
shock.

-  Do not place the following items on the printer.

-  Necklaces and other metal objects
-  Cups, vases, flowerpots, and other containers filled with water or 

liquids

If these items come into contact with a high-voltage area inside the 
printer, this may result in a fire or electrical shock.
If these items are dropped or spilled inside the printer, immediately turn 
OFF the power switch (1) and disconnect the interface cables if they are 
connected (2). Then, unplug the power plug from the AC power outlet (3) 
and contact your local authorized Canon dealer.

-  Do not damage or modify the power cord. Also, do not place heavy 

objects on the power cord or pull on or excessively bend it, as this can 
cause electrical damage, resulting in fire or electrical shock.

-  Keep the power cord away from all heat sources. Failure to do so can 

cause the power cord insulation to melt, resulting in a fire or electrical 
shock.

-  The power cord should not be taut, as this may lead to a loose 

connection and cause overheating, which could result in a fire.

-  The power cord may become damaged if it is stepped on, fixed with 

staples, or if heavy objects are placed on it. Continued use of a 
damaged power cord can lead to an accident, such as a fire or electrical 
shock.

-  Do not plug or unplug the power plug with wet hands, as this can result 

in electrical shock.

-  Do not plug the power cord into a multi-plug power strip, as this can 

result in a fire or electrical shock.

-  Do not bundle up or tie up the power cord in a knot, as this can result in 

a fire or electrical shock.

-  Insert the power plug completely into the AC power outlet. Failure to do 

so can result in a fire or electrical shock.

-  If excessive stress is applied to the connection part of the power cord, it 

may damage the power cord or the wires inside the machine may 
disconnect. This could result in a fire. Avoid the following situations:
-  Connecting and disconnecting the power cord frequently.
-  Tripping over the power cord.
-  The power cord is bent near the connection part, and continuous stress 

is being applied to the power outlet or the connection part.

-  Applying a shock to the power connector.

-  Do not use power cords other than the one provided, as this can result in 

a fire or electrical shock.

-  As a general rule, do not use extension cords. Using an extension cord 

may result in a fire or electrical shock.

-  Do not install the printer in unstable locations, such as on unsteady 

platforms or inclined floors, or in locations subject to excessive 
vibrations, as this may cause the printer to fall or tip over, resulting in 
personal injury.

-  The ventilation slots are provided for proper ventilation of working parts 

inside the printer. Never place the printer on a soft surface, such as a 
bed, sofa, or rug. Blocking the slots can cause the printer to overheat, 
resulting in a fire.

-  Do not install the printer in the following locations, as this may result in a 

fire or electrical shock.
- A damp or dusty location
- A location exposed to smoke and steam, such as near a cookery or 

humidifier

- A location exposed to rain or snow
- A location near a water faucet or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames

-  When installing the printer, gently lower the printer to the installation site 

so as not to catch your hands between the printer and the floor or 
between the printer and other equipment, as this may result in personal 
injury.

-  When connecting the interface cable, connect it properly by following the 

instructions in the e-Manual. If not connected properly, this may result in 
malfunction or electrical shock.

-  When moving the printer, follow the instructions in the e-Manual to hold it 

correctly. Failure to do so may cause you to drop the printer, resulting in 
personal injury.

-  Do not use a power supply voltage other than that listed herein, as this 

may result in a fire or electrical shock.

-  Always grasp the power plug when unplugging the power plug. Do not 

pull on the power cord, as this may expose the core wire of the power 
cord or damage the cord insulation, causing electricity to leak, resulting 
in a fire or electrical shock.

-  Leave sufficient space around the power plug so that it can be 

unplugged easily. If objects are placed around the power plug, you may 
be unable to unplug it in an emergency.

To avoid the risk of personal injury or damage to the printer, and for legal 
information, make sure to read the "Legal Notices" and "Important Safety 
Instructions" in the e-Manual included on the accompanying CD-ROM 
carefully before using the printer.

Para evitar el riesgo de lesiones personales o daños al equipo, y a efectos 
de información legal, recuerde leer detenidamente los "Avisos legales" y las 

"Instrucciones de seguridad importantes" del e-Manual incluido en el 

CD-ROM antes de utilizar la impresora.

This manual describes only warnings and cautions for the installation and the power 
supply. Be sure to read "Important Safety Instructions" described in the e-Manual 
(HTML manual) included in the supplied CD-ROM also.

User Software

Double-click [index.html] in the [SFP] - [Documents] - 
[english] - [GUIDE] folder in the supplied CD-ROM.

Double-click [index.html] in the [Manuals] - [Source] folder in 
the supplied CD-ROM.

This guide describes how to set up the printer in the Windows 
environment as examples. To view how to use printer drivers or 
utilities for Macintosh, see the "Printer Driver Guide for Macintosh" 
(HTML manual). For handling the printer or maintenance methods 
and so on, see the "e-Manual" (HTML manual).