Canon EOS Rebel T5 18-55 IS II Kit Manual

Descargar
Página de 111
6
Confirming Computer Settings
Before you start up EU, connect the camera and the computer and 
set the camera's power switch to <ON>, then make sure that the 
following settings are applied to your computer. If these are not 
applied, adjust the settings as follows. Internet connection is 
required.
Windows XP
Select [Control Panel] 
 [Scanners and Cameras].  Right-click 
the icon of the camera connected to the computer. 
 Select 
[XXX (Camera name) Properties] 
 [Events] tab, and select 
[Take no action] for [Actions].
Windows Vista
Select [Control Panel] 
 [Hardware and Sound]  [Autoplay].  
In the [Device] options on the screen displayed, select [No 
Action] from the pull-down menu next to the name of the camera 
connected to your computer.
Windows 7
Select [Control Panel] 
 [Devices and Printers].  Double-click 
the icon of the camera connected to the computer. 
 Double-
click [Change general settings] in the menu that appears. 
 Set 
the pull-down menu for [When this device connects to this 
computer] to [Take no action].
Windows 8.1/Windows 8
Select [Control Panel] 
 [View devices and printers].  Double-
click the icon of the camera connected to the computer. 
 Select 
and double-click [Change general settings] in the menu that 
appears. 
 Set the pull-down menu for [When this device 
connects to this PC] to [Take no action].
After confirming and adjusting the settings, set the camera's power 
switch to <OFF>.
To start up EU, you must connect your camera to the same USB 
port as when you confirmed and adjusted the settings.
To use another USB port, confirm and adjust the settings again.
COP
Y