Canon EOS Rebel T6s EF-S 18-135mm IS STM Lens Kit Manual

30

Connecting with the NFC Function



Perform further operations using 
Camera Connect. For the operation 
procedure, see page 35.

The settings for communicating with a smartphone are now complete.



When touching the smartphone to the camera, be careful not to drop the 
camera or smartphone.



Do not touch the smartphone to the camera with too much force. Doing 
so can scratch the camera or smartphone.



Just holding the smartphone close to the mark may not establish a 
connection. Be sure to touch the mark with the smartphone so that they 
come into contact with each other.



Recognition may be difficult depending on the smartphone. Touch slowly 
while changing the position or angle.



Another application on the smartphone may start depending on how you 
touch. Check the position of the p mark, then touch again.



A connection cannot be established via the NFC function while shooting 
with the camera, when the power switch is set to <k>, when there is no 
card, or when the LCD monitor is closed with the screen facing inward.



When touching the smartphone to the camera, do not leave anything 
between the camera and smartphone. In addition, when a case is 
attached to the camera or smartphone, communication may not be 
possible via NFC function. 



When Battery Grip BG-E18 (sold separately) is attached, a connection 
cannot be established via the NFC function.



The camera cannot be connected to two or more smartphones at the 
same time.



By default, the connection settings via the NFC function are saved as the 
fourth setting (a setting dedicated to NFC connection) under the name 
[SET4(NFC)]. When you connect the camera to another smartphone via 
NFC, [SET4(NFC)] will be overwritten.



A connection can be established even when the camera’s power is in the 
auto power off state. However, if a connection cannot be established, 
cancel auto power off, then establish a connection.