Canon EOS Rebel T6s EF-S 18-135mm IS STM Lens Kit Manual

Saving Images



Do not drop the camera on Connect Station or touch the camera to it with
too much force. Doing so may damage Connect Station’s internal hard disk.



Since the camera may not be recognized readily, hold it carefully close to
Connect Station while changing the camera’s position or angle.



Just holding the camera close to Connect Station may not establish a
connection. In such a case, gently touch Connect Station with the
camera.



A connection cannot be established via the NFC function while shooting
with the camera, when the power switch is set to <k>, when there is no
card, or when the LCD monitor is closed with the screen facing inward.



When holding the camera close to Connect Station, do not leave
anything between the camera and Connect Station. In addition, when a
case is attached to the camera, communication may not be possible via
NFC function.



When Battery Grip BG-E18 (sold separately) is attached, a connection
cannot be established via the NFC function.



If the camera and Connect Station are moved too far away from each
other while importing images, import may take time or the connection
may be terminated.



If the camera’s battery runs out during import, the import will stop.
Charge the battery, then try importing again.



A connection can be established even when the camera’s power is in the
auto power off state. However, if a connection cannot be established,
cancel auto power off, then establish a connection.



When all images are already imported, import does not start. In such a
case, select [OK] to terminate the connection.



When there are a large number of images on the memory card, it may
take time to check and save the images.