Canon EOS 7D Mark II Wi-Fi Adapter Kit Manual

6

To download to your computer images shot with your camera, you will 
need to connect your camera and computer using the interface cable 
provided with the camera.



For the location and direction of the USB port, refer to the user’s 
manual for the computer.



Once the plug is connected to the camera according to the steps 
for your camera model, preparation for downloading images is 
complete. Refer to “

 Confirming Computer Settings” to check 

the settings of the computer, and continue with “Starting up EU” 



With the <

> mark on the plug facing the front of the camera, 

connect it to the camera’s <A/V OUT / DIGITAL> terminal.

7D Mk II



When connecting the cable to the camera, use the cable 
protector 

. Connect the cable to the digital terminal with the 

plug’s <

> icon facing the back of the camera.



Confirming Computer Settings
Before you start up EU, connect the camera and the computer 
and set the camera’s power switch to <ON>, then make sure that 
the following settings are applied to your computer. If these are 
not applied, adjust the settings as follows. 

Select [Applications] 

 [Image Capture].  Double-click the 

icon of the camera connected to the computer. 

 Set 

[Connecting this camera opens] to [No application].

After confirming and adjusting the settings, set the camera’s 
power switch to <OFF>.
To start up EU, you must connect your camera to the same USB 
port as when you confirmed and adjusted the settings.
To use another USB port, confirm and adjust the settings again.



With 

, you can fix the plug to the 

camera with the cable protector to prevent the plug from 
disconnecting. For details on using, see 

1D X

1D C

7D Mk II

7D Mk II

COP

Y