You can crop only the part of an image you need, or change the
composition of an image where an image shot horizontally becomes
vertical. You can also adjust the angle of an image before trimming. If
you select [Circle] for [Aspect ratio], the area outside the specified range
will only be masked in black and the image will not be trimmed.

Select the image to be trimmed.

Open the trimming/angle adjustment window.



Click the [Trimming Angle] button.



The trimming/angle adjustment window appears.



Editing can be done once the image is displayed clearly in the
trimming/angle adjustment window.

Adjust the angle of the image as needed.



If you click [Center on Screen], you can display the trimming
range in the center of the window.



If you click the [OK] button after adjusting only the angle of the
image, the image will be trimmed at the largest possible trimming
range.

When aspect ratio information is attached to an image shot with the
EOS-1D X, EOS-1D C, EOS-1D Mark IV, EOS-1Ds Mark III, EOS-
1D Mark III, EOS 5D Mark III, EOS 6D, EOS 7D Mark II, EOS 7D,
EOS 70D, EOS 60D, EOS REBEL T5i/700D, EOS REBEL SL1/
100D, EOS REBEL T4i/650D, EOS REBEL T3i/600D, EOS REBEL
T5/1200D, EOS M2 or EOS M, the trimming range based on the
aspect ratio information is displayed.

Trimming/angle adjustment window

Use the mouse (click

/) to adjust the angle or

directly enter the adjustment angle

(0.01-degree

increments; adjustable range: -45 to +45 degrees)

Click (rotate
image left
or right in
90-degree
increments)

Drag

(0.01-degree increments;

adjustment range: -45 to +45 degrees)

Largest
possible
trimming
range

You cannot adjust the angle of images that exceed 9999 x 6666
pixels in size.

COP