Canon EOS 7D Mark II Wi-Fi Adapter Kit Manual

69

Select multiple images to correct in the main window. Display tool 
palette by clicking the [Tool Palette] button 

 in the toolbar. If you 

perform correction procedures 

 when tool palette is displayed, you 

can apply the same corrections to all the images selected in the main 
window.
Also, you can apply same corrections by copying the recipe of the 
corrected image and pasting it onto the multiple images 

.



Some noise appeared in the periphery of an image after 
correcting [Peripheral illumination] 
You can reduce the noise by using luminance and/or chromatic noise 
reduction of the noise reduction function 

. However, if you had 

applied high amount of [Peripheral illumination] correction to the 
images that have been shot at night or with a high ISO speed, the 
noise might not be reduced.



The image appears with less resolution after correcting 
[Distortion]
You can make the image similar to the one before correction by 
applying more sharpness with the sharpness adjusting function 

.



The colors of the image became weaker after correcting [Color 
blur]
You can make the image similar to the one before correction by 
adjusting the color tone 

 and/or the color saturation 

 to 

make the color deeper.



The result of [Color blur] correction cannot be detected
[Color blur] correction is effective for correcting blue or red color blur 
which occurs at the edge of the highlighted area of an image. If 
conditions do not match, correction cannot be made.

The periphery of the image may be truncated when [Distortion] 
correction is made.

For a list of the [Lens aberration correction] window functions, see 

COP

Y