Canon EOS 7D Mark II Wi-Fi Adapter Kit Manual
8
The Wi-Fi/LAN connection pairing function of EU is used for LAN
connection. This function cannot be used with
connection. This function cannot be used with
.
Establish a connection following the procedures on Wireless File
Transmitter Instruction Manual, Wi-Fi Function Instruction Manual or
Wired LAN Instruction Manual supplied with the camera, and Wi-Fi
Adapter W-E1 Instruction Manual. Note the difference between
connection procedures for EU version 2.14 or later and those for EU
version 2.13 or earlier as shown below.
Transmitter Instruction Manual, Wi-Fi Function Instruction Manual or
Wired LAN Instruction Manual supplied with the camera, and Wi-Fi
Adapter W-E1 Instruction Manual. Note the difference between
connection procedures for EU version 2.14 or later and those for EU
version 2.13 or earlier as shown below.
Starting up WFT pairing software
(EU version 2.13 or earlier)
Starting up WFT pairing software is required.
(EU version 2.14, version 3.x)
While starting up WFT pairing software is not necessary, starting up
EU is required.
(EU version 2.13 or earlier)
Starting up WFT pairing software is required.
(EU version 2.14, version 3.x)
While starting up WFT pairing software is not necessary, starting up
EU is required.
When a camera is detected
(EU version 2.13 or earlier)
When a camera is detected and a message is displayed, double-click
the WFT pairing software icon.
(EU version 2.14, version 3.x)
When a camera is detected and a message is displayed, click the
message.
(EU version 2.13 or earlier)
When a camera is detected and a message is displayed, double-click
the WFT pairing software icon.
(EU version 2.14, version 3.x)
When a camera is detected and a message is displayed, click the
message.
LAN Connection with EU
REBEL T6S
760D
REBEL T6i
750D
REBEL T6
1300D
M3
M10
Before starting the procedure to establish a LAN connection, make sure
to perform the following confirmation.
to perform the following confirmation.
1
Start up EU before connecting the camera and the
computer.
computer.
The following window appears.
2
Click the [Pairing over Wi-Fi/LAN] button. When a
message [To connect to the camera via LAN, some
Firewall settings must be changed. Do you want to
make these changes?] appears, select [Yes].
message [To connect to the camera via LAN, some
Firewall settings must be changed. Do you want to
make these changes?] appears, select [Yes].