Canon EOS 7D Mark II Wi-Fi Adapter Kit Manual
7
Confirming Computer Settings
Before you start up EU, connect the camera and the computer
and set the camera’s power switch to <ON>, then make sure that
the following settings are applied to your computer. If these are
not applied, adjust the settings as follows. Internet connection is
required.
Before you start up EU, connect the camera and the computer
and set the camera’s power switch to <ON>, then make sure that
the following settings are applied to your computer. If these are
not applied, adjust the settings as follows. Internet connection is
required.
Windows 7
Select [Control Panel]
[Devices and Printers]. Double-
click the icon of the camera connected to the computer.
Double-click [Change general settings] in the menu that
appears.
appears.
Set the pull-down menu for [When this device
connects to this computer] to [Take no action].
Windows 8.1/Windows 8
Select [Control Panel]
[View devices and printers].
Double-click the icon of the camera connected to the
computer.
computer.
Select and double-click [Change general
settings] in the menu that appears.
Set the pull-down menu
for [When this device connects to this PC] to [Take no action].
After confirming and adjusting the settings, set the camera’s
power switch to <OFF>.
To start up EU, you must connect your camera to the same USB
port as when you confirmed and adjusted the settings.
To use another USB port, confirm and adjust the settings again.
power switch to <OFF>.
To start up EU, you must connect your camera to the same USB
port as when you confirmed and adjusted the settings.
To use another USB port, confirm and adjust the settings again.
With
, you can fix the plug to the
camera with the cable protector to prevent the plug from
disconnecting. For details on using, see
disconnecting. For details on using, see
to
1D X
1D C
7D Mk II
COP
Y