Canon EOS 7D Mark II Wi-Fi Adapter Kit Manual
30
1
Remove the protective cover.
Detach the protective cover provided
with the battery.
with the battery.
2
Attach the battery.
As shown in the illustration, attach the
battery securely to the charger.
battery securely to the charger.
To detach the battery, follow the
above procedure in reverse.
above procedure in reverse.
3
Recharge the battery.
For LC-E6
For LC-E6
As shown by the arrow, flip out the
battery charger’s prongs and insert
the prongs into a power outlet.
battery charger’s prongs and insert
the prongs into a power outlet.
For LC-E6E
Connect the power cord to the
charger and insert the plug into a
power outlet.
charger and insert the plug into a
power outlet.
X
Recharging starts automatically and
the charge lamp blinks in orange.
the charge lamp blinks in orange.
It takes approx. 2 hr. and 30 min. to fully recharge a completely exhausted battery at
room temperature (23°C / 73°F). The time required to recharge the battery will vary
greatly depending on the ambient temperature and the battery’s remaining capacity.
room temperature (23°C / 73°F). The time required to recharge the battery will vary
greatly depending on the ambient temperature and the battery’s remaining capacity.
For safety reasons, recharging in low temperatures (5°C - 10°C /
41°F - 50°F) will take longer (up to approx. 4 hr.).
41°F - 50°F) will take longer (up to approx. 4 hr.).
Charging the Battery
LC-E6
LC-E6E
Charge Level
Charge Lamp
Color
Display
0-49%
Orange
Blinks once per second
50-74%
Blinks twice per second
75% or higher
Blinks three times per second
Fully charged
Green
Lights up