Canon EOS 7D Mark II Wi-Fi Adapter Kit Manual
6
Connecting the Camera and Computer
To download to your computer images shot with your camera, you will
need to connect your camera and computer using an interface cable.
Before connecting your camera and computer with EU’s Wi-Fi/LAN
connection pairing function, see “LAN Connection with EU”
need to connect your camera and computer using an interface cable.
Before connecting your camera and computer with EU’s Wi-Fi/LAN
connection pairing function, see “LAN Connection with EU”
.
1
Connect the large plug of the cable into the USB port
of your computer.
of your computer.
For the location and direction of the USB port, refer to the user’s
manual for the computer.
manual for the computer.
2
Connect the small plug of the cable into the digital
terminal on your camera.
terminal on your camera.
Once the plug is connected to the camera according to the steps
for your camera model, preparation for downloading images is
complete. Refer to “
for your camera model, preparation for downloading images is
complete. Refer to “
Confirming Computer Settings” to check
the settings of the computer, and continue with “Starting up EU”
.
When connecting the cable to the camera, use the cable
protector. Connect the cable to the digital terminal with the plug’s
<
protector. Connect the cable to the digital terminal with the plug’s
<
> icon facing the back of the camera.
Cameras other than those above
With the <
> mark on the plug facing the front of the camera,
connect it to the camera’s <A/V OUT / DIGITAL> terminal.
1D X Mk II
5DS/5DS R
5D Mk IV
7D Mk II
Using a genuine Canon interface cable is recommended.
Confirming Computer Settings
Before you start up EU, connect the camera and the computer
and set the camera’s power switch to <ON>, then make sure that
the following settings are applied to your computer. If these are
not applied, adjust the settings as follows.
Before you start up EU, connect the camera and the computer
and set the camera’s power switch to <ON>, then make sure that
the following settings are applied to your computer. If these are
not applied, adjust the settings as follows.
Windows 7
Select [Control Panel] [Devices and Printers]. Double-
click the icon of the camera connected to the computer.
Double-click [Change general settings] in the menu that
appears. Set the pull-down menu for [When this device
connects to this computer] to [Take no action].
click the icon of the camera connected to the computer.
Double-click [Change general settings] in the menu that
appears. Set the pull-down menu for [When this device
connects to this computer] to [Take no action].
Windows 8.1/Windows 8
Select [Control Panel] [View devices and printers].
Double-click the icon of the camera connected to the
computer. Select and double-click [Change general
settings] in the menu that appears. Set the pull-down menu
for [When this device connects to this PC] to [Take no action].
Double-click the icon of the camera connected to the
computer. Select and double-click [Change general
settings] in the menu that appears. Set the pull-down menu
for [When this device connects to this PC] to [Take no action].
Windows 10
Select the Start menu [Settings] [Devices] [AutoPlay]
In the window that appears, locate the pull-down menu
under the name of the camera connected to the computer and
set it to [Take no action].
In the window that appears, locate the pull-down menu
under the name of the camera connected to the computer and
set it to [Take no action].
After confirming and adjusting the settings, set the camera’s
power switch to <OFF>.
To start up EU, you must connect your camera to the same USB
port as when you confirmed and adjusted the settings.
To use another USB port, confirm and adjust the settings again.
power switch to <OFF>.
To start up EU, you must connect your camera to the same USB
port as when you confirmed and adjusted the settings.
To use another USB port, confirm and adjust the settings again.
With , you can fix the plug to the camera with the cable protector to
prevent the plug from disconnecting. For details on using it, see
the camera instruction manual.
prevent the plug from disconnecting. For details on using it, see
the camera instruction manual.
1D X Mk II
1D X
1D C
5DS/5DS R
5D Mk IV
7D Mk II