Canon EOS 7D Mark II Wi-Fi Adapter Kit Manual

127

3

 Customizing AF FunctionsN

You can set the AI Servo AF’s starting AF point for when the AF area 
selection mode is set to Auto selection: 65 pt AF.

AI Servo AF will start with the 
manually-selected AF point when the 
AF operation is set to AI Servo AF 
and the AF area selection mode is set 
to Auto selection: 65 pt AF.

If you switch from Manual select.:Spot AF, Manual selection:1 pt AF, 
Expand AF area: , or Expand AF area:Surround to Auto selection: 
65 pt AF, AI Servo AF will start with the AF point that was manually 
selected before the switch. Convenient if you want AI Servo AF to 
start with the AF point which was selected before the AF area 
selection mode was switched to Auto selection: 65 pt AF.
After you set the AF area selection mode to Auto selection: 65 pt AF 
with the [83: Custom Controls] menu’s [Metering and AF start] 
(p.450), [Switch to registered AF func.] (p.452), or [Register/
recall shooting func] (p.457), you can press the assigned button 
during Manual select: Spot AF, Manual selection: 1 pt AF, Expand 
AF area: , or Expand AF area: Surround to switch to AI Servo AF 
using Auto selection: 65 pt AF instead of the AF point used 
immediately before.

The AF point which AI Servo AF starts with is set automatically to 
suit the shooting conditions.

When [Manual 

 AF pt] is set, AI Servo AF will start with the zone 

that corresponds to the manually selected AF point, even if you switch AF 
area selection mode to Zone AF (manual selection of zone) or Large Zone 
AF (manual selection of zone).