Canon EOS 7D Mark II Wi-Fi Adapter Kit Manual

177

3

 Setting Noise ReductionN

 

If there is significant misalignment in the image due to camera shake, the 
noise reduction effect may be minimal.

 

If you are handholding the camera, keep it steady to prevent camera 
shake. Using a tripod is recommended.

 

If you shoot a moving subject, the moving subject may leave 
afterimages.

 

The image alignment may not function properly with repetitive patterns 
(lattice, stripes, etc.) or flat, single-tone images.

 

If the subject’s brightness changes as the four consecutive shots are 
taken, irregular exposure in the image may result.

 

Recording the image to the card will take longer than with normal 
shooting. During the processing of the images, “buSY” will be displayed 
in the viewfinder and on the LCD panel, and you cannot take another 
picture until the processing is completed.

 

You cannot use AEB and WB bracketing.

 

The [Distortion] setting will be set automatically to [Disable].

 

If [z3: Long exp. noise reduction], [z3: Multiple exposure], [z3: 
HDR Mode], AEB, or WB bracketing is set, [Multi Shot Noise 
Reduction] cannot be set.

 

Flash shooting is not possible. The AF-assist beam will be emitted 
according to the [23: AF-assist beam firing] setting.

 

You cannot set [Multi Shot Noise Reduction] for bulb exposures and 
movie shooting.

 

The setting will automatically switch to [Standard] if you do any of the 
following: Turn the power switch to <2>, change the battery, replace 
the card, select the <A> or <F> shooting mode, set or switch the 
image-recording quality to RAW or RAW+JPEG, or switch to movie 
shooting.