Canon EOS 7D Mark II Wi-Fi Adapter Kit Manual
248
You can connect the Remote Switch RS-80N3 (sold separately) or
Timer Remote Controller TC-80N3 (sold separately) or any EOS
accessory equipped with an N3-type terminal to the camera for
shooting (p.478).
To operate the accessory, refer to its instruction manual.
Timer Remote Controller TC-80N3 (sold separately) or any EOS
accessory equipped with an N3-type terminal to the camera for
shooting (p.478).
To operate the accessory, refer to its instruction manual.
1
Open the terminal cover.
2
Connect the plug to the remote
control terminal.
control terminal.
Connect the plug as shown in the
illustration.
illustration.
To disconnect the plug, grasp the
silver part and pull.
silver part and pull.
F
Using a Remote Switch
R
Remote Control Shooting
With Remote Controller RC-6 (sold separately), you
can shoot remotely up to approx. 5 meters/16.4 feet
from the camera. You can either shoot immediately or
use a 2-sec. delay.
You can also use Remote Controller RC-1 and RC-5.
can shoot remotely up to approx. 5 meters/16.4 feet
from the camera. You can either shoot immediately or
use a 2-sec. delay.
You can also use Remote Controller RC-1 and RC-5.
1
Focus on the subject.
2
Set the lens’s focus mode switch
to <MF>.
to <MF>.
You can also shoot with <f>.
3
Press the <o> button.
(9)