Canon EOS 7D Mark II Wi-Fi Adapter Kit Manual

265

3

 Setting the FlashN

 

Normally, set this to [E-TTL II]. This 
enables autoexposure shooting with the 
built-in flash.

To set the flash output level manually, 
select [Manual flash].
Select [2flash output], then set the 
flash output level to within 1/1 - 1/128 
(1/3-stop increments) before shooting. 
This mode is for advanced users.

With [MULTI flash] selected, you can 
use a slow shutter speed to capture 
multiple moments of a moving subject in 
one image.
First set the [2flash output], 
[Frequency], and [Flash count], then 
shoot. This mode is for advanced users.

 

To prevent the flash from damage due to overheating, do not use MULTI 
flash more than ten consecutive times. If you use MULTI flash 10 times, 
allow the flash to rest for at least 10 min. before firing the flash again.

 

Flash will be output at 1/128 - 1/4 for MULTI flash.