Canon EOS 7D Mark II Wi-Fi Adapter Kit Manual

283

Using Wireless FlashN

When [Flash mode] is set to [Manual flash], flash exposure can be set 
manually. The flash output settings that can be set ([1 flash output], 
[Group A output], etc.) vary depending on the [Wireless func.] setting 
(see below).

Wireless func.: 0

 

Firing group: 1All
The manual flash output setting is 
applied to all the external Speedlites.

 

Firing group: 1(A:B:C)
You can divide the slave units into 
Groups A, B, and C and set the flash 
output separately for each group.

Wireless func.: 0+3

 

Firing group: 1All and2
You can set the flash output 
separately for the external 
Speedlite(s) and built-in flash.

 

Firing group: 1(A:B:C)2
You can divide the slave units into 
Groups A, B, and C and set the flash 
output separately for each group. You 
can also set the flash output for the 
built-in flash.

Built-in flash will be output at 1/4 - 1/128 when 0+3 is set.