Canon EOS 7D Mark II Wi-Fi Adapter Kit Manual

413

Preparing to Print

 

Press the <

x

> button.

X

The image will appear with the <w> 
icon on the upper left of the screen to 
indicate that the camera is connected 
to a printer.

 

Make sure the printer has a PictBridge connection port.

 

Use the provided interface cable or one from Canon (p.478). When 
connecting the interface cable, use the provided cable protector (p.34).

 

Movies cannot be printed.

 

The camera cannot be used with printers conforming only to CP Direct or 
Bubble Jet Direct.

 

If there is a long beeping sound in step 5, it indicates a problem with the 
printer. Resolve the problem displayed in the error message (p.420).

 

Printing is not possible if Multi Shot Noise Reduction or the HDR Mode is 
set.

 

You can also print RAW images taken with this camera.

 

If you use a battery to power the camera, make sure it is fully charged. 
With a fully-charged battery, printing up to approx. 3 hr. is possible.

 

Before disconnecting the cable, first turn off the camera and printer. Hold 
the plug (not the cord) to pull out the cable.

 

For direct printing, using the DC Coupler DR-E6 (sold separately) and 
AC Adapter AC-E6N (sold separately) to power the camera is 
recommended.