Canon EOS 7D Mark II Wi-Fi Adapter Kit Manual

w Printing

418

In step 4 on page 416, select the printing 
effect. When the <ze> icons are 
displayed brightly, you can press the 
<B> button. You can then adjust the 
printing effects. What can be adjusted or 
what is displayed will depend on the 
selection made in step 4.

 

Brightness
The image brightness can be adjusted.

 

Adjust levels
When you select [Manual], you can change 
the histogram’s distribution and adjust the 
image’s brightness and contrast.
With the Adjust levels screen displayed, press 
the <B> button to change the position of 
the <

h

>. Turn the <5> dial to freely adjust 

the shadow level (0 - 127) or highlight level (128 - 255).

 

k

Effective in backlit conditions where the subject’s face looks dark. 
When [On] is set, the face will be brightened for printing.

 

Red-eye corr.
Effective in flash images where the subject has red eye. When [On] 
is set, the red eye will be corrected for printing.

e

 

The [

k

Brightener] and [Red-eye corr.] effects will not be reflected on 

the screen.

 

When [Detail set.] is selected, you can adjust the [Contrast], 
[Saturation], [Color tone], and [Color balance]. To adjust the [Color 
balance], use <

9

>. B is for blue, A for amber, M for magenta, and G for 

green. The image’s color balance will be corrected towards the selected 
color.

 

If you select [Clear all], all the printing effect settings will be reverted to 
their defaults.