Canon EOS 7D Mark II Wi-Fi Adapter Kit Manual

Descargar
Página de 548
499
Troubleshooting Guide
 
During Live View shooting and movie shooting, the AF control method 
(phase-difference detection with the image sensor or contrast 
detection) switches automatically depending on the lens type and 
function used such as magnified view. The AF speed may therefore 
change greatly and focusing may take longer.
 
If FlexiZone - Multi is set, it may take longer to focus on the subject 
depending on the shooting conditions. Use FlexiZone - Single or focus 
manually.
 
If the movie recording size is set to L 8(59.94 fps) or 7(50.00 
fps), contrast detection will be used for the AF control.
 
Depending on the shutter speed, aperture, subject conditions, 
brightness, etc., the continuous shooting speed may become slower 
(p.142).
 
When EOS iTR AF is operating (p.128), maximum continuous 
shooting speed set with <o> will be approx. 9.5 shots/sec. Also, 
under low-light conditions, the continuous shooting speed may 
decrease.
 
If [Anti-flicker shoot.] is set to [Enable] and you shoot under 
flickering light, the continuous shooting speed may become slightly 
slower, or the continuous shooting interval may become irregular. 
Also, the time lag until shutter release may be slightly longer than 
usual (p.185).
 
If you shoot something that has fine detail such as a field of grass, the 
file size will be larger, and the actual maximum burst may be lower 
than the number mentioned on page 151.
AF speed changes depending on lenses used.
Focusing takes a long time.
The continuous shooting speed is slow.
The maximum burst during continuous shooting is lower.