Olympus DM-520 Manual De Introducción

•  [OVER] may be displayed even when 

the indicator of the recording level 

meter does not reach or is over to 

the right.If sound distortions do not 

disappear even after the recording 

level has been adjusted, change the 

setting for microphone sensitivity (☞ 

P.47) and adjust the recording level 

again .

•  Inputting  a  very  loud  sound  may 

produce noise even when the recording 

level is set to [Auto].

•  The level can be adjusted from [01] to 

[16]. The higher the number, the higher 

the level and the larger the indicator 

position on the level meter.

The directional microphone function utilizes 

DiMAGIC’s (DiMAGIC Co., Ltd.) DiMAGIC

Virtual Microphone (DVM) technology. DVM is 

an audio pickup system which allows you

to  record  by  focusing  on  sound  from  any 

direction. From expansive stereo recording

to high directivity recording, DVM represents 

the latest in directional control methods

that allow you to switch to a single exclusive 

microphone.

[Zoom]:

  Recording with monaural, however you 

can record high directivity sound.

[Narrow]:

  Recording by a directivity stereo sound.

[Wide]:

  Recording by an expansive stereo sound.

[Off]:

  Disables this function.

The recorder has a Low Cut Filter function to 

minimize low-frequency sounds and record 

voices more clearly. This function can reduce 

noise from air conditioners, projectors and 

other similar noises.

[On]: Enables the Low Cut Filter function.

[Off]: Disables this function.

When the microphone senses that sounds have 

reached a preset threshold volume level, the 

built-in Variable Control Voice Actuator (VCVA) 

starts  recording  automatically,  and  stops 

when the volume drops below the threshold 

level.  The  VCVA  feature  extends  recording 

time  and  conserves  memory  by  stopping 

recording during silent periods, which helps 

the playback to be more efficient.

[On]: Enables the VCVA function. Will start  

 

recording in VCVA mode.

[Off]: Disables this function. Will resume  

 

recording in normal mode.

 Press the RECs button to start

•  When the sound volume is lower than 

the preset threshold sound level, 

recording automatically stops after 

1 sec approximately, and [Standby] 

flashes on the display. The recording 

indicator light glows when recording 

starts and flashes when recording 

pauses.